Durango 2WD V8-5.7L Hybrid (2009)
2. Tighten the screws to 11 Nm (95 in. lbs.).
3. Connect the electrical connectors (1).
4. Insert the bent end of the latch actuator rod (2) to the swing clip on the latch (4), and snap clip onto rod. Then without changing the position of the
liftgate outside handle (1), snap the grooved end of the rod into the metal clip on the handle.
5. Install the trim panels. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel - Installation
