Durango 2WD V8-5.7L Hybrid (2009)
Memory Positioning Module: Service and Repair
Memory Seat Module - Installation
INSTALLATION
1. Place the module (4) into position making sure the front snaps into the seat frame (3).
2. Connect the memory seat module harness connectors (1).
3. Pivot the module (4) downward and snap it into place in the side brackets.
4. Install the driver seat cushion/cover (2) See: Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Installation.
5. Connect the battery negative cable.
6. Using an appropriate scan tool go to the MSM miscellaneous functions and perform the standardization routine.
7. Verify system and vehicle operation.
