Durango 2WD V8-5.7L Hybrid (2009)
Door Module: Service and Repair
Door Module - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel -
Removal.
3. First disconnect the black 10-way electrical connector (1), then the brown 20-way electrical connector (2). If applicable, next disconnect the black
12-way electrical connector (3) from the module.
4. Remove fasteners and module from vehicle.