Durango 2WD V8-5.7L Hybrid (2009)
Seat Heater Control Module: Description and Operation
Heated Seat Module - Operation
OPERATION
The heated seat module operates on fused battery current received from the ignition switch. The module is grounded at all times through a ground lug on
the right rear D-pillar. Inputs to the module include CAN bus messages and standard hardwired 12volt power and ground. In response to those inputs the
heated seat module controls the battery current to the heated seat elements.
When a heated seat switch CAN bus signal is received by the heated seat module, the module energizes the selected heated seat element. The Low heat
set point is about 38°C (100.4°F), and the High heat set point is about 42°C (107.6°F).
If the heated seat module detects a heated seat element OPEN or SHORT circuit, it will record and store an diagnostic trouble code (DTC).
