Durango 2WD V8-5.7L Hybrid (2009)
11. Install the air cleaner housing center retaining bolt (2) and tighten to 7 Nm (62 in. lbs.).
12. Connect the intake air temperature (IAT) sensor electrical connector (1).
13. Install the center air cleaner housing trim cover (2).
14. Install the clean air tube (2).
15. Install the clean air tube fastener (3) and tighten to 7 Nm (62 in. lbs.).
16. Connect the High Voltage Inter Lock (HVIL) electrical connector (1).
17. Connect the 12 volt battery system ground isolation connector (1) located next to the electric vacuum pump (2).
18. Perform the HEV high voltage power up procedure See: Hybrid Drive Systems/Battery System, Hybrid Drive/Service and Repair/Battery System
- High Voltage Power Up