dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Valve, Intake/Exhaust > < Valve Springs - Removal|Page 2258
Page 5
background image

17. Install the air cleaner assembly See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Body -

Installation 

18. Install the clean air tube fastener (3) and tighten to 7 Nm (62 in. lbs.).
19. Connect the High Voltage Inter Lock (HVIL) electrical connector (1).

20. Connect the 12 volt battery system ground isolation connector (1) located next to the electric vacuum pump (2).
21. Perform the HEV high voltage power up procedure   See: Hybrid Drive Systems/Battery System, Hybrid Drive/Service and Repair/Battery System

- High Voltage Power Up

Valve, Intake/Exhaust > < Valve Springs - Removal|Page 2258