Durango 2WD V8-5.7L Hybrid (2009)
and Repair/Instrument Panel - Removal.
2. Remove the defroster duct See: Defroster Duct - Removal.
3. Remove the demister ducts See: Instrument Panel Demister Duct - Removal.
4. Remove the two screws (1) that secure the center distribution duct (2) to the instrument panel support.
5. Disconnect the center distribution duct from the instrument panel duct (3) and remove the center duct.
Center Distribution Duct - Installation
INSTALLATION
1. Connect the center distribution duct (2) to the instrument panel duct (3).
2. Install the two screws (1) that secure the center distribution duct to the instrument panel support. Tighten the screws to 2 Nm (17 in. lbs.).
3. Install the demister ducts See: Instrument Panel Demister Duct - Installation.
4. Install the defroster duct See: Defroster Duct - Installation.
5. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
Front
REMOVAL
FRONT FLOOR DISTRIBUTION DUCT
1. Remove the HVAC Housing See: Housing Assembly HVAC/Service and Repair/Removal and Replacement/Front HVAC Housing Removal.
2. Remove the six screws (1) that secure the front floor distribution duct (2) to the bottom of the HVAC housing (3).
3. Remove the front floor distribution duct from the HVAC housing.
INTERMEDIATE FLOOR DISTRIBUTION DUCTS
