Durango 2WD V8-5.7L Hybrid (2009)
1. Position the front floor distribution duct (2) to the bottom of the HVAC housing (3).
2. Install the six screws (1) that secure the front floor distribution duct to the HVAC housing. Tighten the screws to 2 Nm (17 in. lbs.).
3. Install the HVAC housing See: Housing Assembly HVAC/Service and Repair/Removal and Replacement/Front HVAC Housing Installation.
INTERMEDIATE FLOOR DISTRIBUTION DUCTS
1. If removed, connect the right intermediate floor distribution duct (2) to the left intermediate floor distribution duct (3).
2. Connect the left intermediate floor distribution duct to the front floor distribution duct (5).
3. Install the two push-pin fasteners (1) that secure the intermediate floor distribution ducts to the floor support (4).
4. Install the carpet onto the front floor panel and under the instrument panel See: Body and Frame/Interior Moulding / Trim/Carpet/Service and
Repair/Carpet - Installation.
5. Install the front seats See: Body and Frame/Seats/Service and Repair/Seat, Front/Seat - Installation.
6. Install the center floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console - Installation.
Rear
INSTALLATION
