Durango 2WD V8-5.7L Hybrid (2009)
Air Register: Service and Repair
Defroster Grille - Installation
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service Precautions
2. Install the sun sensor (1) and connect the sensor electrical connector, snap the sensor into defroster grille, and slide the metal clip on the bottom of
the sensor.
3. Position the defroster grille (2) into place and connect the electrical connector (3).
4. Position the drivers side A-pillar trim into place and seat the retaining clips fully.
5. Position the passenger side A-pillar trim panel into place and seat fully.
6. Install the bolts and tighten to 6 Nm (55 in. lbs.).
