Durango 2WD V8-5.7L Hybrid (2009)
NOTE: The lines must be kept fully inserted into the connector fitting to obtain a leak free joint.
17. Turn the forcing screw (1) clockwise until both connector fitting collars (2) have bottomed out on the center shoulder of the connector (3).
18. Loosen the forcing screw and remove Tool Body 8456-3 (4) and the jaws (5) from the repaired line(s).
19. Install the underbody mounting brackets as necessary See: Removal and Replacement/A/C Underbody Lines - Installation.
20. Lower the vehicle.
21. Reconnect the negative battery cable.
22. If repairing an underbody coolant line, refill the engine cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
23. If repairing an underbody refrigerant line, evacuate and charge the refrigerant systemSee: Service and Repair/Refrigerant System Charge
