Durango 2WD V8-5.7L Hybrid (2009)
Evaporator Temperature Sensor / Switch: Service and Repair
Front Evaporator Temperature Sensor - Installation
INSTALLATION
1. Install the evaporator temperature sensor (2) into the opening in the HVAC housing (3) near the blend door actuator (4).
2. Connect the HVAC wire harness connector (1) to the evaporator temperature sensor.
3. Install the instrument panel assembly See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel - Installation.
4. Reconnect the negative battery cable.