Durango 2WD V8-5.7L Hybrid (2009)
Battery Bus Junction Board: Service and Repair
High Voltage Terminal Block - Installation
INSTALLATION
1. Install the three screws (3) that hold the lug terminal block (2) to the terminal panel assembly (1).Tighten to 6 Nm (51 in. lbs.).
2. Install the screws (1) from the back of the terminal block.Tighten to 6 Nm (53 in. lbs.).
3. Install the nuts to the terminal cover assembly.
Tighten to 6 Nm (53 in. lbs.)
