dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Other Service Bulletins for Hybrid Power Control Module: > < Hybrid Systems - MIL ON/Multiple DTC's Set|Page 2927
Page 1
background image

Hybrid Power Control Module: All Technical Service Bulletins
Hybrid Systems - DTC U0131 Diagnostics

NUMBER: 08-034-08

GROUP: Electrical

DATE: November 7, 2008

SUBJECT:
Diagnosis Procedures For DTC U0131

OVERVIEW:
This bulletin describes the different procedures required depending on whether DTC U0131 is an active or stored code. The MIL will NOT be
illuminated.

MODELS:

2009

(HB)

Durango HEV

2009

(HG)

Aspen HEV

NOTE:

This bulletin applies to vehicles equipped with a 5.7L Hybrid Engine (Sales Code EZE).

SYMPTOM/CONDITION:

The following DTC may be stored in the Hybrid Gateway Module (HGM). Further investigation by the technician may find that it is either stored or
active:

U0131 - Lost Communication With Power Steering Control Module (EPS).

DISCUSSION:

This DTC may set due to communication issues between different modules. If this code is active, then follow the related diagnosis procedures available
in DealerCONNECT / TechCONNECT.

If the DTC is stored, then clear the code and return the vehicle to the customer, no further action is required. The code has been set due to
communication issues within the module and no repair is required.

POLICY:
Information Only

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

All Other Service Bulletins for Hybrid Power Control Module: > < Hybrid Systems - MIL ON/Multiple DTC's Set|Page 2927