Durango 2WD V8-5.7L Hybrid (2009)
Headlamp Bulb: Service and Repair
Front Lamp Unit Bulb - Installation
BULB - HEADLAMP
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
1. Align the headlamp bulb (3) with the keyed opening on the back of the front lamp unit (1) housing.
2. Insert the bulb into the housing until it is firmly seated.
3. Rotate the bulb clockwise about 30 degrees to lock it into place.
4. Reconnect the headlamp and dash wire harness connector to the headlamp bulb.
5. Reinstall the front lamp unit into the front fender. See: Service and Repair/Front Lamp Unit - Installation.
6. Reconnect the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician trained in
proper HEV service safety procedures must also reinstall the high voltage service disconnect into the high voltage battery pack.