Durango 2WD V8-5.7L Hybrid (2009)
Fuel Pressure Sensor/Switch: Service and Repair
Fuel Pressure Sensor - Installation
INSTALLATION - HEV
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In
addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High
Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury See: Hybrid Drive
Systems/Battery System, Hybrid Drive/Service Precautions
1. Install the fuel pressure sensor (1) into the fuel tank.
2. Connect the fuel pressure sensor electrical connector (1).
3. Raise the fuel tank until snug to the body.