Durango 2WD V8-5.7L Hybrid (2009)
3. Contacting the District Manager.
From the "Home" screen, select "ECU View"
-
Select "WCM"
-
Select "Misc. Functions"
-
Select "PCM Replaced" and follow the on screen instructions.
-
When complete, select "Finish"
Quicklearn
From the "Home" screen, select "ECU View"
-
Select "PCM"
-
Select "Misc. Functions"
-
Select "Quicklearn" and follow the on screen instructions.
-
When complete, select "Finish"
Update CVT TCM
From the "Home" screen:
-
Select "ECU View"
-
Select "TCM"
-
Select "More Options"
-
Select "ECU Flash"
-
Select "Browse for New File" and follow the on screen instructions.
-
Highlight the appropriate calibration.
-
Select "Download to Scantool"
-
Once the download is complete, select "Close" and then "Back"
-
Highlight the listed calibration, select "Update Controller" and follow the on screen instructions.
-
When the TCM update is complete, select "OK"
-
Verify that the part number at the top of the "Flash TCM" screen has updated to the latest level.
SECTION 3 - AUTHORIZED MODIFICATION LABEL
NOTE: The following step is required by law when reprogramming a PCM and/or TCM.
Type the necessary information on the "Authorized Modification Label" and attach near the VECI label.
1. Powertrain Control / Transmission Control Module Part Numbers (Insert P/Ns) Used
2. Change Authority: TSB XX--XX
3. Dealer Code: XXXXX
4. Date: XX-XX-XX
REQUIRED TOOLS/EQUIPMENT:
TECH TIPS and INFORMATION: