Durango 2WD V8-5.7L Hybrid (2009)
Power Steering Pump: Service and Repair
Power Steering Pump - Removal
REMOVAL
1. Disconnect the 12 volt battery system ground isolation connector (1).
2. Siphon the fluid from the power steering pump.
3. Remove the power steering pump upper bracket (1) to Power Distribution Center (PDC) bracket (3) nuts (2). Allow the bracket to remain on the
studs.
4. Raise and support the vehicle, See: Wheels and Tires/Vehicle Lifting/Service and Repair
5. Remove the left front wheel.
6. Remove the inner fender. See: Body and Frame/Fender/Front Fender/Front Fender Liner/Description and Operation.
