Durango 2WD V8-5.7L Hybrid (2009)
Overdrive Switch: Service and Repair
Overdrive Lockout Switch - Installation
INSTALLATION
NOTE: There is enough slack in the wire to pull out the connector from the lever.
1. Pull the connector (2) out of the lever (1) just enough to grasp it.
CAUTION: Be careful not to bend the pins on the tow/haul switch. Use care when installing the switch, as it is not indexed, and can be
accidentally installed incorrectly.
2. Install the tow/haul switch (3) into the connector (2).
3. Push the tow/haul switch (3) and wiring into the shift lever (1).
4. Install the tow/haul switch retainer onto the shift lever.
