Durango 2WD V8-5.7L Hybrid (2009)
Wiper Blade: Description and Operation
Wiper Blade - Description
Front
FRONT
Each front wiper blade is secured by an integral latching pivot block (3) to the hook formation on the tip of each wiper arm, and rests on the glass near
the base of the windshield when the wipers are not in operation. The wiper blade consists of the following components:
-
Superstructure (1) - The superstructure includes several stamped steel bridges and links with claw formations that grip the wiper blade element.
Also included in this unit is the latching, molded plastic pivot block that secures the superstructure to the wiper arm. All of the metal components
of the wiper blade have a satin black finish applied.
-
Element (2) - The wiper element or squeegee is the resilient rubber member of the wiper blade that contacts the glass.
-
Flexor (7) - The flexor is a rigid metal component running along the length of each side of the wiper element where it is gripped by the claws (6)
of the superstructure. The flexor is also designed to provide a predetermined curvature that best fits the curvature of glass throughout the wipe
pattern.
The right wiper blade is 53.00 centimeters (20.87 inches) long, and the left blade is 65.09 centimeters (25.63 inches) long. Both have non-replaceable
rubber elements (squeegees). The wiper blades cannot be adjusted or repaired. If ineffective, worn, or damaged the entire wiper blade unit must be
replaced.
Rear
REAR
The rear wiper blade is secured by two integral latching pivot pins (1) to a receptacle in the small end at the tip of the rear wiper arm, and rests near the
base of the liftgate glass when the wiper is not in operation. The rear wiper blade consists of the following components:
-
Superstructure (4) - The superstructure includes a molded black plastic bridge and plastic links with claw formations that grip the wiper blade
