Durango 2WD V8-5.7L VIN 2 (2007)
Rear Door Panel: Service and Repair
Panel-Trim
Removal
REMOVAL
1. Remove the screws (3 & 5).
CAUTION: Trim panel is attached to the door using hooks molded into the panel. Do not pull the trim panel straight off or damage to the panel
and/or power switch assembly may occur.
2. Lift the trim panel up off the lock rod (2) and attachment hooks and separate the panel from the door slightly.
3. Disconnect the electrical connectors (6).
4. Disconnect the inside handle actuator rod (1).
5. Disconnect the electrical connector and remove the tweeter.
