Durango 2WD V8-5.7L VIN 2 (2007)
Rocker Arm Assembly: Service and Repair
Installation
INSTALLATION
CAUTION: The longer push rods are for the exhaust side, and the shorter push rods are for intake side.
1. Install the push rods in the same order as removed.
2. Install the pushrod retaining plate (1) special tool 9070.
CAUTION: Ensure that retainers (2) and rocker arms (4) are not overlapped when torquing bolts.
CAUTION: Verify that pushrod is installed into rocker arm (4) and tappet correctly while installing rocker shaft assembly. Recheck after
rocker shaft has been torqued to specification.
