Durango 2WD V8-5.7L VIN 2 (2007)
Blower Motor: Service and Repair
Installation - Rear
INSTALLATION
1. Position the rear blower motor (2) into the rear air inlet housing (4).
2. Install the three screws (3) that secure the rear blower motor to the rear air inlet housing. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Connect the rear HVAC wire harness connector (1) to the rear blower motor.
4. Install the rear HVAC housing.
5. Reconnect the negative battery cable.
