Durango 2WD V8-5.7L VIN 2 (2007)
Blower Motor Resistor: Service and Repair
Installation - Rear
INSTALLATION
1. Position the rear blower motor resistor (2) into the rear HVAC housing (4).
2. Install the screw (3) that secures the rear blower motor resistor to the rear HVAC housing. Tighten the screw to 2 Nm (17 in. lbs.).
3. Connect the rear HVAC wire harness connector (1) to the rear blower motor resistor.
4. Install the right rear quarter interior trim panel.
5. Reconnect the negative battery cable.