Durango 2WD V8-5.7L VIN 2 (2007)
Alignment: Service and Repair
Height Adjustment
HEIGHT ADJUSTMENT
The vehicle suspension height MUST be measured and adjusted before performing wheel alignment procedure. Also when front suspension components
have been replaced. This measurement must be performed with the vehicle supporting it's own weight and taken on both sides of the vehicle.
To adjust the vehicle height turn the torsion bar adjustment bolt CLOCKWISE to raise the vehicle and COUNTER CLOCKWISE to lower the vehicle.
CAUTION: ALWAYS raise the vehicle to the correct suspension height, NEVER lower the vehicle to obtain the correct suspension height. If
the vehicle suspension height is too high, lower the vehicle below the height specification. Then raise the vehicle to the correct suspension height
specification. This will insure the vehicle maintains the proper suspension height.
NOTE: If a height adjustment has been made, perform height measurement again on both sides of the vehicle.