Durango 2WD V8-5.7L VIN 2 (2007)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0524 Stored in Memory
NUMBER: 18-003-08
GROUP: Vehicle Performance
DATE: January 19, 2008
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 18-044-07, DATED OCTOBER 12, 2007, WHICH SHOULD BE REMOVED
FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE THE ADDITION OF YEARS, MODELS
AND CLEAN DATES.
THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.
StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 8.04 OR HIGHER FOR THIS BULLETIN.
StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM THIS PROCEDURE.
SUBJECT:
Flash: MIL Illumination Due To Diagnostic Trouble Code P0524 - Engine Oil Pressure Too Low
OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.
MODELS:
**2007** - 2008
(DR/DH/DC/D1)
Ram Truck (1500/2500/3500)
**2007** - 2008
(HB/HG)
Durango / Aspen
**2007** - 2008
(LX)
300 / Magnum / Charger
**2007
(LE)
300C/300 Touring (International Markets)**
**2007
(L2)
300 (China)**
**2007** - 2008
(WK)
Grand Cherokee
**2007 - 2008
(WH)
Grand Cherokee (International Markets)**
**2007** - 2008
(XK)
Commander
**2007 - 2008
(XH)
Commander (International Markets)**
NOTE:
This bulletin applies to the above listed vehicles equipped with a 5.7L engine with MDS (sales code EZB) built before the following dates:
^
(HB/HG) built before August 15, 2007 (MDH 0814XX)
^
(LX) built before September 14, 2007 (MDH 0914XX)
^
(DR) built before August 16, 2007 (MDH 0816XX)
** (WK/WH/XK/XH) built before January 8, 2008 (MDH 0108XX)**
SYMPTOM/CONDITION:
The vehicle operator may experience a Malfunction Indicator Lamp (MIL) illumination due to the following Diagnostic Trouble Code (DTC):
P0524 - Engine Oil Pressure Too Low
DIAGNOSIS:
Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If other DTC's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.
