Durango 2WD V8-5.7L VIN 2 (2007)
7. Install bolts into two of the threaded holes in the flange 180° apart.
8. Position Holder 6719A against the flange and install a bolt and washer into one of the remaining threaded holes. Tighten the bolts so the Holder
6719A is held to the flange.
9. Remove pinion nut and washer.
10. Mark a line across the pinion shaft and flange (1) for installation reference.
11. Remove flange (1) with Puller C-452 (2).
12. Remove pinion seal with seal puller.
Installation
INSTALLATION
1. Apply a light coating of gear lubricant on the lip of pinion seal.
2. Install new pinion seal with Installer C-4076-B (3) and Handle C-4735 (1).