Durango 2WD V8-5.7L VIN 2 (2007)
Heated Glass Element Relay: Service and Repair
Installation
INSTALLATION
NOTE: Refer to the fuse and relay map on the inside of the junction block (JB) cover for EBL relay location.
1. Position the EBL relay into the proper receptacle of the JB (1).
2. Align the EBL relay terminals with the terminal cavities in the JB receptacle and push down firmly on the relay until the terminals are fully seated.
3. Install the trim cover onto the driver side cowl (2).
4. Reconnect the negative battery cable.
