Durango 2WD V8-5.9L VIN Z LDC (2000)
Central Timer Module: Service and Repair
Before replacing a high-line Central Timer Module (CTM), use a DRB scan tool to determine the current settings for the CTM programmable features.
These settings should be duplicated in the replacement CTM using the DRB scan tool, before returning the vehicle to service.
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS AND SEAT BELTS/AIRBAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the glove box from the instrument panel.
Outboard Glove Box Opening Bracket Remove/Install
3. Remove the three screws that secure the bracket on the outboard side of the glove box opening to the instrument panel.