Durango 2WD V8-5.9L VIN Z LDC (2000)
REMOVAL
1. Using a trim stick C-4755 or equivalent, pry upper trim from liftgate opening.
2. Grasp upper trim and pull downward to disengage spring clips.
Fig. 17
3. Separate upper trim from liftgate opening (Fig. 17).
INSTALLATION
1. Position upper trim in liftgate opening (Fig. 17).
2. Align spring clips and press inward to secure.
A-Pillar Trim
A-PILLAR TRIM
REMOVAL
1. Remove A-pillar grab handle, if equipped.
2. Remove screws from cowl trim cover.
3. Remove cowl trim cover.