dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Four Wheel Antilock System|Page 4190 > < Controller Antilock Brake <--> [Electronic Brake Control Module]|EBC 325|Page 4187
Page 1
background image

Controller Antilock Brake: Service and Repair
Four Wheel Antilock System

NOTE:  If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programmed into the new CAB. For axle type refer to
Transmission and Drivetrain,  Differential. For tire revolutions per mile refer to Steering and Suspension, Tires, Wheels and Alignment. To program the
CAB refer to Testing and Inspection, Procedures, Diagnostic Information and Procedures.

REMOVAL 

1. Disconnect battery negative cable.

2. Push the harness connector locks to release the locks, then remove the connectors from the CAB.

3. Disconnect the pump motor connector.

Four Wheel Antilock System|Page 4190 > < Controller Antilock Brake <--> [Electronic Brake Control Module]|EBC 325|Page 4187