dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Driver Airbag|Page 5530 > < Driver Airbag|Page 5528
Page 1
background image

Air Bag: Service and Repair
Passenger Airbag

The following procedure is for replacement of a faulty or damaged passenger side airbag module. If the passenger side airbag module has been deployed,
the instrument panel assembly must be replaced. The instrument panel assembly includes the passenger side airbag module and the passenger side airbag
door.

WARNING:

-

THE AIRBAG SYSTEM IS A SENSITIVE, COMPLEX ELECTROMECHANICAL UNIT. BEFORE ATTEMPTING TO DIAGNOSE
OR SERVICE ANY AIRBAG SYSTEM OR RELATED STEERING WHEEL,STEERING COLUMN, OR INSTRUMENT PANEL
COMPONENTS YOU MUST FIRST DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE. THEN WAIT
TWO MINUTES FOR THE SYSTEM CAPACITOR TO DISCHARGE BEFORE FURTHER SYSTEM SERVICE. THIS IS THE
ONLY SURE WAY TO DISABLE THE AIRBAG SYSTEM. FAILURE TO DO THIS COULD RESULT IN ACCIDENTAL AIRBAG
DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

-

WHEN REMOVING A DEPLOYED AIRBAG MODULE, RUBBER GLOVES, EYE PROTECTION, AND A LONG-SLEEVED SHIRT
SHOULD BE WORN. THERE MAY BE DEPOSITS ON THE AIRBAG MODULE AND OTHER INTERIOR SURFACES. IN LARGE
DOSES,THESE DEPOSITS MAY CAUSE IRRITATION TO THE SKIN AND EYES.

REMOVAL

1. Disconnect and isolate the battery negative cable. If either of the airbags has not been deployed, wait two minutes for the system capacitor to

discharge before further service.

2. Remove the instrument panel top cover and the passenger side airbag module from the instrument panel as a unit.
3. Place the instrument panel top cover assembly on a suitable work surface. Be certain to take the proper precautions to protect the top cover from

any possible cosmetic damage.

Passenger Side Airbag Module Vents

4. Apply masking tape over the passenger side airbag module vents on each end of the module. The tape will help to prevent foreign material from

entering the airbag module through the vents during removal and installation of the module from the upper airbag door flange and bracket.

WARNING:  USE EXTREME CARE TO PREVENT ANY FOREIGN MATERIAL FROM ENTERING THE PASSENGER SIDE
AIRBAG MODULE, OR BECOMING ENTRAPPED BETWEEN THE INSTRUMENT PANEL TOP COVER AND THE PASSENGER
SIDE AIRBAG MODULE. FAILURE TO OBSERVE THIS WARNING COULD RESULT IN OCCUPANT INJURIES UPON AIRBAG
DEPLOYMENT.

Driver Airbag|Page 5530 > < Driver Airbag|Page 5528