dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Intake Air Temperature (IAT) Sensor <--> [Intake Air Temperature Sensor]|Specifications|Page 732

Durango 2WD V8-5.9L VIN Z LDC (2000)

Page 1
background image

Intake Air Temperature (IAT) Sensor: Service and Repair

Fig. 36 - Intake Manifold Air Temperature Sensor (Typical)

The intake manifold air temperature sensor is located in the front/side of the intake manifold.

REMOVAL

1. Remove air duct at throttle body.
2. Disconnect electrical connector at sensor.
3. Remove sensor from intake manifold.

INSTALLATION

1. Install sensor to intake manifold. Tighten to 28 Nm (20 ft. lbs.) torque.
2. Install electrical connector.
3. Install air duct at throttle body.

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Intake Air Temperature (IAT) Sensor <--> [Intake Air Temperature Sensor]|Specifications|Page 732