Durango 4WD V6-3.6L (2011)
Oil Change Reminder Lamp: Service and Repair
The vehicle is equipped with an engine oil change indicator system. The "Oil Change Required" message will flash in the instrument cluster odometer for
approximately ten seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is
duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.
Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily,
press and release the Menu button. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following
procedure.
1. Turn the ignition switch to the ON position (do not start the engine).
2. Fully depress the accelerator pedal, slowly, three times within ten seconds.
3. Turn the ignition switch to the LOCK position.
Note: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset. If necessary, repeat these steps.
