Durango 4WD V6-3.6L (2011)
The vehicles 150 Amp TIPM Battery Feed Fuse is located under the Battery (+) Jumper Post Cover (Fig. 2). The fuse can be blown during attempts to
jump start the vehicle when the positive jumper cable is connected to the TIPM Battery (+) Terminal (Fig. 3) instead of the Battery (+) Jumper Post.
When servicing the TIPM, the battery must first be disconnected. Contact between the Battery (-) Jumper Post and the 11PM Battery (+) Terminal (Fig.
3), without the battery being disconnected, may cause damage to the vehicles 150 Amp TIPM Battery Feed Fuse. The vehicles 150 Amp TIPM Battery
Feed Fuse is located under the Battery (+) jumper cover (Fig. 2).
POLICY:
Information Only
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
