Durango 4WD V6-3.9L VIN X (1998)
Luggage Rack: Service and Repair
LUGGAGE RACK
REMOVAL
Fig. 10
1. Remove screws attaching side rail to roof panel (Fig. 10).
2. Separate luggage rack from vehicle.
NOTE: The skid strips are attached to roof panel with adhesive.
3. Loosen each skid strip with a heat gun.
4. Lift one edge of each skid strip with a putty knife and peel it from roof panel. Apply additional heat to any location where a skid strip remains.
5. Remove original adhesive from roof panel with an all-purpose adhesive removal solution.
INSTALLATION
NOTE: Thoroughly clean and prepare the roof surface.
1. Align each skid strip on roof panel.
2. Verify that each skid strip is properly aligned.
3. Remove the carrier backing and press each skid strip onto roof panel with a roller.
NOTE: Apply 3M Drip-Chek Sealant (or an equivalent product) to side rail screw threads.
4. Position luggage rack on roof.
5. Install screws attaching side rail to roof panel (Fig. 10).