Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
NOTE: Typical primer installation shown.
7. Clean and dry area of glass (2) to be re-glued with a suitable glass preparation solvent and rag.
8. Apply primer to gluing surface at backlite seal.
9. Apply primer (1) around the perimeter of the glass to a width of 15 mm (0.5 in.) (2).
10. Allow primer to air dry for at least 10 minutes.
11. Using a flash light, verify that glass primer is without damage.
Liftgate Opening Preparation
NOTE: Windshield opening shown, liftgate opening similar.
1. Clean and vacuum liftgate opening.
2. Level old bead of liftgate opening adhesive (1) to a thickness of approximately 1 mm (0.04 in.) and remove loose adhesive.