dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Trunk / Liftgate Ajar Switch > < Power Trunk / Liftgate Hazard Tone Speaker|Removal
Page 1
background image

Power Trunk / Liftgate Hazard Tone Speaker: Service and Repair
Installation

INSTALLATION

1. Snap the chime assembly (3) onto the liftgate (1).

2. Connect the wire connector (2).

3. Position the upper trim (2) into place and seat the push pin fasteners fully.

4. Connect the battery negative cable.

Trunk / Liftgate Ajar Switch > < Power Trunk / Liftgate Hazard Tone Speaker|Removal