Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
4. Install the screws (1) holding the motor (3) to the seat adjuster (2). It may be necessary to twist the motor slightly to align the fastener holes.
5. Starting with the bottom screw, tighten the motor screws (1) to 9 Nm (80 in. lbs.).
6. Tighten the motor shaft screw and washer to 6.5 Nm (57.5 in. lbs.).
7. Connect the motor electrical connector.
8. Install the seat cushion.
9. Clip the wire harness to cushion pan.
10. Install the seat assembly.
11. Connect the battery negative cable.
12. Verify normal operation of the power seat assembly.
