Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
7. Remove the inner fender well.
8. Remove the fasteners for the integrated power module (IPM) (4).
9. Move the IPM (4) forward to allow clearance to remove the master cylinder (1).
NOTE: Gently ease the master cylinder & reservoir assembly (1) away from the booster (2), During removal the master cylinder should
be kept as perpendicular to the front of the booster as possible to avoid excess interference with the booster output rod and in order not
to dislodge the output rod (3) from its seat inside the booster.
10. Move the master cylinder (1) off the booster and forward to the engine side.
11. Remove the brake lamp switch.
12. Remove clip securing booster push rod to brake pedal (1).
13. Remove the brake booster mounting nuts (2).
14. Remove the booster (4) with the spacer block (3) and gasket (2) from front cowl panel.
