Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Vacuum Brake Booster: Service and Repair
Installation
Without ESP
WITHOUT ESP
1. Install the spacer block and gaskets if removed.
2. Guide the booster studs into the cowl panel holes and seat the booster (1) on the panel.
3. Install and tighten new booster attaching nuts (2) to 28 Nm (250 in. lbs.).
4. Install the booster push rod (1) on brake pedal and install clip.
5. Install a new brake lamp switch.
6. Install the vacuum hose to the check valve (1).
