Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Remove the HVAC Housing.
2. Remove the six screws (1) that secure the front floor distribution duct (2) to the bottom of the HVAC housing (3).
3. Remove the front floor distribution duct from the HVAC housing.
INTERMEDIATE FLOOR DISTRIBUTION DUCTS
4. Remove the center floor console.
5. Remove the front seats.
6. Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle.
7. Remove the two push pin fasteners (1) that secure the right intermediate floor distribution duct (2) and the left intermediate floor distribution duct
(3) to the floor support (4).
8. Disconnect the left intermediate floor distribution duct from the front floor distribution duct (5).
9. If required, disconnect the right intermediate floor distribution duct from the left intermediate floor distribution duct.
Installation
INSTALLATION
FRONT FLOOR DISTRIBUTION DUCT
