dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ambient Temperature Sensor / Switch HVAC > < Distribution - Front|Page 8500
Page 4
background image

3. Disconnect the rear ceiling distribution duct from the rear HVAC housing (5) by sliding the lower half of the ceiling distribution duct into the

upper half of the ceiling distribution duct.

4. Disconnect the rear ceiling distribution duct from the headliner duct and remove the ceiling distribution duct from the vehicle.

5. Disconnect the rear floor distribution duct from the rear HVAC housing and remove the floor distribution duct from the vehicle.

Installation

INSTALLATION

1. Connect the rear floor distribution duct (3) to the rear HVAC housing (5).

2. Connect the rear ceiling distribution duct (2) to the headliner duct and the rear HVAC housing. Make sure that the rear ceiling distribution duct is

fully installed to ensure a good seal.

3. Install the push-pin fasteners (1) that secure the rear ceiling distribution duct and the rear floor distribution duct to the right interior quarter panel

(4).

4. Install the right interior quarter panel trim.

Ambient Temperature Sensor / Switch HVAC > < Distribution - Front|Page 8500