Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
8. Disconnect the intermediate floor distribution duct from the front floor distribution duct.
9. Remove the two bolts (1) that secure the HVAC housing (2) to the passenger compartment side of the dash panel (3).
10. Pull the HVAC housing rearward so that the mounting studs and condensate drain tube clear the dash panel and remove the front HVAC housing
from the passenger compartment.
Front HVAC Housing Installation
INSTALLATION
1. Position the HVAC housing (2) into the passenger compartment with the mounting studs and the condensate drain tube in their proper mounting
locations in the dash panel (3).
2. Loosely install the two bolts (1) that secure the HVAC housing to the passenger compartment side of the dash panel.
3. Install the four nuts (1) that secure the HVAC housing (2) to the engine compartment side of the dash panel (3). Tighten the nuts to 7 Nm (62 in.
lbs.).
4. Tighten the two bolts that secure the HVAC housing to the passenger compartment side of the dash panel. Tighten the bolt(s) to 3 Nm (26 in. lbs.)
.
5. Connect the intermediate floor distribution duct to front floor distribution duct.
6. Install the instrument panel.
7. Remove previously installed plugs or caps and reconnect the heater hoses to the heater core tubes.
8. Remove previously installed plugs or caps and reconnect the suction line and liquid line to the expansion valve.
