Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Disconnect and isolate the battery negative cable.
2. Remove the glove box from the instrument panel.
3. Reach through the window (4) in the instrument panel (1) to access and depress the retaining latch on either side of the glove box lamp and switch
unit (2).
4. While holding the retaining latch depressed, push the glove box lamp and switch unit out through the mounting hole in the face of the instrument
panel.
5. Disconnect the wire harness connector from the glove box lamp and switch.
6. Remove the lamp and switch unit from the instrument panel.