Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
13. Select the proper size jaws (1) for the line being repaired from the A/C Line Repair Tool Kit 8456-A. Refer to the Jaw Size chart.
14. Assemble the jaws into the tool body (Special Tool 8456-3 in Kit 8456-A) (2).
a. For standard installation, install the jaws with the rubber gripping pads (3) facing outward. Refer to Tube Length chart.
b. For reversed installation, remove the rubber gripping pads and install the jaws with the rubber gripping pad area facing inward. Refer to Tube
Length chart.
NOTE: The connector fitting ends must be positioned into the counterbore of the jaws in order for the connector fitting to properly seal the
repair area.
15. Install the connector fitting (1) and the line ends (4) into the counterbore of the jaws (5).
16. Hold the tool body (Special Tool 8456-3 in Kit 8456-A) (2) with a 3/8 inch breaker bar and turn the forcing screw (3) clockwise.
