Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
NOTE: The lines must be kept fully inserted into the connector fitting to obtain a leak free joint.
17. Turn the forcing screw (1) clockwise until both connector fitting collars (2) have bottomed out on the center shoulder of the connector (3).
18. Loosen the forcing screw and remove the tool body (Special Tool 8456-3 in Kit 8456-A) (4) and the jaws (5) from the repaired line(s).
19. Install the underbody mounting brackets as necessary.
20. Lower the vehicle.
21. Reconnect the negative battery cable.
22. If repairing an underbody coolant line, refill the engine cooling system.
23. If repairing an underbody refrigerant line, evacuate and charge the refrigerant system.
