Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Manifold Pressure/Vacuum Sensor: Service and Repair
Installation
4.7L V-8
The MAP sensor is located on the front of the intake manifold. An O-ring seals the sensor to the intake manifold.
1. Clean MAP sensor mounting hole at intake manifold.
2. Check MAP sensor O-ring seal for cuts or tears.
3. Position sensor into manifold.
4. Install MAP sensor mounting bolts (screws) and tighten to 25 in. lbs. (3 Nm).
5. Connect electrical connector.