Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Throttle Body: Service and Repair
Installation
4.7L V-8
1. Clean throttle body-to-intake manifold O-ring.
2. Clean mating surfaces of throttle body and intake manifold.
3. Install throttle body to intake manifold by positioning throttle body to manifold alignment pins.
4. Install three mounting bolts. Tighten bolts to 12 Nm (105 in. lbs.) torque.
5. Install control cables.
6. Install vacuum line to throttle body.
7. Install electrical connectors.
8. Install air plenum.
