Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
4. Reinstall the trim cover (1) onto the center seat back.
5. Install the seat belt lower anchor through the belt web guide bezel (2) and position the bezel onto the top of the center seat back panel.
6. Install and tighten the two screws (3) that secure the bezel to the top of the seat back. Tighten the screws to 2 Nm (20 in. lbs.).
7. Position the second row center seat belt lower anchor (1) to the hinge bracket (3). Be certain the anti-rotation tab on the anchor is engaged in the
clearance hole of the bracket.
8. Install and tighten the screw (2) that secures the lower anchor to the bracket. Tighten the screw to 43 Nm (32 ft. lbs.).
9. Position the center seat back left hinge bracket cover (1) onto the bracket (3).
10. Install and tighten the three screws (2) that secure the cover to the bracket. Tighten the screws to 2 Nm (20 in. lbs.).
