Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
2. Position the third row outboard seat belt and retractor (5) to the D-pillar as a unit.
3. Install and tighten the screw (6) that secures the retractor bracket to the lower D-pillar. Tighten the screw to 39 Nm (29 ft. lbs.).
4. Position the seat belt turning loop (3) to the inside of the upper D-pillar.
5. Install and tighten the screw (4) that secures the turning loop to the D-pillar. Tighten the screw to 39 Nm (29 ft. lbs.).
6. Reinstall the quarter trim panel to the lower D-pillar.
7. Route the seat belt (2) and lower anchor through the access hole in the D-pillar trim panel (1).
8. Reinstall the D-pillar trim panel to the inside of the upper D-pillar.
9. Position the seat belt lower anchor (2) to the tapping plate (3) on the quarter inner panel.
10. Install and tighten the screw (1) that secures the lower anchor to the tapping plate. Tighten the screw to 39 Nm (29 ft. lbs.).
11. Restore the third row seat cushion to its seating position.
